ASSEN TYA Lubricating Oil Filtration Process Plant

Oxidation of lubricating oil is an important factor in the deterioration of lubricating oil. According to the existence of oil, it can be divided into thick oil layer oxidation and thin oil layer oxidation.

Oxidation of thick oil layer is generally more common in the oxidation of lubricating oil such as oil tanks and oil pipelines. Because the oil layer is thicker, the oxidation rate of the entire oil layer is slower, and the oxidation depth is correspondingly lower. Oxidation in places like the cylinder wall and bearing surface belongs to the oxidation of thin oil layers, and its oxidation speed and depth are much greater than those of thick oil layers.

When the lubricating oil flows in the engine, some lubricating oil will remain on the cylinder liner, and the temperature of up to several hundred degrees will cause the light fractions in the lubricating oil to be vaporized and the heavy fractions to be oxidized. The macromolecular components generated by oxidation are mixed with the fuel components in the engine and then enter the oil sump from the piston ring, which will increase the oxidation rate of the lubricating oil.

 

What harm will the oxidized lubricating oil bring to the engine?

1. After the lubricating oil is oxidized, it will produce acidic substances, which will corrode the metal parts of the machine.

2. After the lubricating oil is oxidized, insoluble deposits will be formed, which will easily block the oil circuit and oil filter pipeline, greatly reduce the circulation efficiency of the lubricating oil, accelerate the wear of the machine, and even cause mechanical failure due to the loss of lubrication and cooling.

3. Oxidation will change the appearance and chemical properties of the lubricating oil, causing problems such as darker color, increased viscosity, and increased acidity.

 

 

How to do emulsified lubricating oil filtration process?

When your lubricating oil has the above situation, our TYA lubricating oil filtration system is highly recommended to you.

ASSEN TYA vacuum lubricating oil filtration machine has perfect capability of removing impurities, mass and deep precision purification material from lubricating oil and improve its properties, so as to greatly extend lifetime of machinery.

 

By using the ASSEN hydraulic oil filtration machine you will benefit by the following:

Break emulsification value	≤15min (GB/F 7305)
Gas content	<0.2%
Kinematic viscosity (40°C)	28.8-35.2 mm²/s
Flash point ( open cup)	> 190°C
Filtration accuracy	≤ 5 micron
Clean degree	≤6grade (NAS1638)

*Extended lubricating oil life

*Reduced machine downtime

*Less equipment maintenance

 

Our Advantages

1. Strong demulsification ability. The average demulsification time is within 15 minutes
2. High-precision filtration can effectively remove impurities smaller than 1μm. After several times of filtration, the cleanliness of the oil can be stably maintained at the NAS1638 6 level without block.it is suitable for precision hydraulic systems.
3. Reducing equipment error and losses of shutdown, save the maintenance cost.
4. Greatly extend the life of oil, reduce 90-99% production of waste oil, and protect the environment at the same time.
5. Perfect auto protection device ensure the plant can continuous work without people, It is a low maintenance cost and best economic benefit machine.